Built in Queensland, Australia
Mill your own grain and make your own ration — cut feed costs, cut labour, and get the same feed every day.
Trusted by dairy, beef and mixed operations
The K&W range
Four systems, one idea: weigh, mill and mix on farm with equipment a farm workshop can keep running.
Milling only
Compact, hot-dip galvanised grain mill with a German Multicracker® — PLC controlled and plug-in ready. Up to 8 t/hr.
Best for: cracking your own barley, wheat or corn, with no contractor and no processing margin.
M1 Basic in detail
Mill + mix in one pass
Your complete ration — cleaned, milled, dosed and mixed in a single continuous pass. Up to 10 ingredients, unlimited recipes.
Best for: dairy, beef and mixed operations that want a full ration ready to feed, with no separate mixer.
M1 Mill & Mix in detail
Rations + dry licks, bagged
Milled-grain rations and dry licks from the one plant — weighed, milled, mixed and bagged. 3-tonne batches in about 45 minutes.*
Best for: larger operations and feed suppliers making both rations and licks.
Hybrid plant in detail
Liquid mixing only
Fully automated liquid mixing — up to 5 ingredients in 1,000 L batches, dosed and mixed from a touchscreen.
Best for: molasses, oil and liquid supplement blends.
AMMS in detailTell us your herd, silos and daily tonnage and we'll tell you honestly which system suits — or whether one does at all. A short comparison video is on the way.
Why K&W
Buy grain, protein and minerals direct and mill them yourself — no processing margin, no freight on finished feed.
A uniform German Multicracker® crush and accurate, calibrated ratios on every tonne, every day. Low-level sensors and drive fault monitoring stop the run before an off-spec ration is made.
Hot-dip galvanised and stainless steel, off-the-shelf Schneider Electric drives and motors, wiring done properly — so a farm workshop can keep it running and K&W can support it for years.
What could you save?
From a real K&W feed costing report — 300 head on 9 kg of grain a day (2.7 t/day):
Your savings depend on herd size, ration and commodity prices. We'll run the numbers for your operation, free.
Run your own numbersSee it working
Silos, flexi-augers, turret, mill, dosing and the touchscreen — start to finish in three and a half minutes.
Common questions
Tap a question to watch a short answer from the team.
About K&W Milling
K&W Milling was created by Simon Ward — a dairy farm kid with a passion for engineering and CAD design — and Brendan Kelly, an electrician with a sharp eye for automation. It didn't start in a workshop.
How K&W was createdTell us about your herd, silos and ration and we'll design a system for your site — with a free savings report.
